© Copyright 2015 by Haas Automation, Inc. No unauthorized reproduction.
Page 2 of 3
Страница 1: ... and the air pressure is discharged before attempting to work on this machine The drive mechanism for the apc is located inside the rotating door It can be accessed for troubleshooting by removing either half of the door Apc disassembly requires removing the door Disassembly is a top down process Copyright 2015 by Haas Automation Inc No unauthorized reproduction Page 1 of 3 ...
Страница 2: ... Copyright 2015 by Haas Automation Inc No unauthorized reproduction Page 2 of 3 ...
Страница 3: ... pins 10 Lift the hub off of the APC shaft 11 If the bearings need to be replaced remove them from below the hub using a punch If the bearings are removed replace them Pack the new bearings with Moly grease 12 Remove the air cylinder per the instructions in the air cylinder removal section 13 Lift the seal housing off of the bridge The cam assembly is heavily greased and may be stuck inside the se...
