background image

8

What is an ultra-microfiber?

An ultra-microfiber is a textile fiber that is thinner and more absorbent than a micro-
fiber (1.0dtex) pad typically used with steam mops.  Specifically, to be defined as an 
ultra-microfiber, it should be less than 0.2dtex.  The Ultra-Microfiber pad by HAAN

®

 

Corporation is made of .17dtex ultra-microfibers.

    

The Multiforce Pro™’s ability to clean so effectively lies in the design of its steam dis-
tribution system, CR-motion™.  Two reciprocating pads moving in opposite directions 
of one another provides a back-and-fourth motion that utilizes the power of steam to 
clean.  Each pad has 10 steam jets that provide a continuous flow of 212º steam.  The 
steam jets are strategically positioned on the pads to produce a consistent flow of 
high temperature steam from one end of the pad to the other.  The Multiforce Pro™’s 
CR-motion™ technology enhances the natural pull-and-push motion of standard 
steam mops and takes steam cleaning to a whole new level. 

The Multiforce Pro™ offers a number of cleaning options:
1. 

Steam can be used without CR-motion

.

2. 

CR-motion

 can be used without steam.

3. 

Steam and CR-motion™ can be used simultaneously.

steam, scrub, Buff and Polish - all in One Machine.

To steam, or not to steam - it’s your choice.

How to Use Ultra-Microfiber Pads

 

1. 

Please make sure that a completely dry pad is used.

 

2. 

As high temperature steam passes through a pad to contact the floor

 

 

to kill germs, molds, mites and to provide a certain amount of water

 

 

necessary for cleaning, it is natural that the pad gradually absorbs

 

 

moisture.  After a certain length of time, the pad repels water and

 

 

becomes damp.

 

3. 

To keep the floor clean and dry, replace the pad when it is dirty.

 

4. 

Only remove pad from unit when not in use and steam is not being

 

 

emitted.

How to Clean and store

 

1. 

Hand wash or machine wash the ultra-microfiber pad in cold water    

 

 

on the delicate cycle with a mild detergent. (Do not use a  

 

 

 

 

fabric softener)

 

2. 

Using a washing machine may shorten the lifespan of the pads.

 

3. 

We recommend air drying the ultra-microfiber pad for 24 hours, but

 

 

they could be dried in a dryer on a low heat setting.

Chlorate

bleach

Hanger Lightly

ultra-microfiber pads for HAAN

®

 multiforce pro™

About HAAN’s Cr-motion

 technology

Содержание Multiforce Pro SS-25





















Отзывы: