![background image](http://html2.mh-extra.com/html/haan/hs-20/hs-20_instruction-manual_3111698008.webp)
6
7
Before Using Your Handheld Cleaner
Be sure to read ALL instructions and warnings
before
using
your Handheld Cleaner.
After plugging in the power cord and beginning to heat, a fixed amount of water is
released due to the build-up of internal pressure. After heating is complete, spray
the steam 2 to 3 times before affixing or switching any additional attachment.
Using Your Handheld Cleaner - Operating Instructions
LOCK
UNLOC
K
LOCK
UNLOC
K
CL
OSE
OPEN
LO
CK
STEAM READY
POWER
UN
LO
CK
1
1
2
4
7
10
Push down on the Pressure
Locking Safety Cap until the
cap “clicks”. While cap is
pressed, turn counterclock-
wise to remove.
Turn the Pressure Locking
Safety Cap clockwise to tight-
en. The cap will spin freely
when properly tightened.
The accessory attachment
will be locked into position
when the indicator line is lined
up with the handheld double
indicator line.
The Steam Ready indicator
will light up when the unit is
ready to use.
LOCK
UNLOC
K
OPEN
OPEN
CLOSE
CLOSE
LO
CK
UN
LO
CK
2
5
8
11
Remove Pressure Locking
Safety Cap. The Continuous
Steam Lock should be in the
“unlocked” position.
NOTE:
During extended periods of constant steaming the unit will need to occasion-
ally re-pressurize. While building up pressure the Steam Ready Light will go off. When
the unit has re-pressurized the Steam Ready Light will light up.
NOTE:
A slight odor may occur when using the unit for the first time.
To attach the Concentrator
Nozzle, flexible Extension
Hose or garment/Surface At-
tachment, line up the indicator
line on the accessory attach-
ment with the indicator line on
the handheld unit.
With an accessory attach-
ment secured to the unit, turn
unit on by plugging into a
grounded electrical outlet.
Press the Easy Control Trigger
2-3 times before steam cleaning
to release any residual water
built up in the nozzle.
3
6
9
12
fill the measuring Cup with
200ml of water and pour into
the water tank.
Press accessory attachment
onto the Steam Nozzle and
rotate to the “Closed”
position.
When plugged in the green
Power indicator will light up.
Wait 2-3 minutes for unit to
heat up.
To access continuous steam
push the Continuous Steam
Lock to the “locked” position.
LOCK
UNLOC
K
OPEN
CLOSE
OPEN
CLOSE
LO
CK
STEAM READY
POWER
UN
LO
CK
LOCK
UNLOC
K
CAUTION
CAUTION
CAUTION
CAUTION
Use a grounded receptacle. Use only a heavy duty extension cord rated for 15 amps
minimum – DO NOT use an ordinary extension cord. To provide continued protec-
tion against the risk of electric shock, connect to properly grounded outlet only.
After use, pressure will exist within the product. Press the Control Trigger to elimi-
nate this pressure prior to opening the Pressure Locking Safety Cap.
The handheld cleaner is designed to clean hard surfaces and upholstery that will
withstand high heat. DO NOT use on soft plastic and cold glass. On surfaces that
have been treated with wax, or on some no-wax floors, the sheen may be removed
by the heat and steam action. DO NOT use on unsealed wood. This could cause
the wood panel to rise. It is recommended that an isolated surface area be tested
to verify suitability before proceeding to the rest of the area.