Haag-Streit C.MOR HD, Инструкция по эксплуатации, Страница: 27 / 44

Haag-Streit AG Operation of C.MOR HD and C.MOR HD³ | 7
1500 4000089 02010_web 27
Menu Function Default
value Note
Foot Switch Foot Switch NONE Carries out different operations for foot
switches in use. It is possible to use up to
4 foot switches.
White Balance WB Mode AWB
Sets the white balance mode. See Choose
White Balance Mode [
}
29] and Perform
Automatic White Balance (AWB) [
}
31] .
Manual Gain Red -16 Adjusts the red gain.
Manual Gain Blue -28 Adjusts the blue gain.
Miscellaneous Center Marker OFF Sets the center marker of the display.
Beep* OFF Activates a beep when operating a button.
Menu Lock ON Sets a lock function for all menu settings.
When activated, no settings can be
changed, except the menu lock. See
Show
or Hide Setup Menu [
}
27] .
Cancel READY Restores the last saved menu items.
Initialize (exp.
Scene) READY Initializes all settings except those for the
scene files.
*Only for C.MOR HD³
7.3.2 Show or Hide Setup Menu
1. Make sure that an external monitor is connected to the CCU (see Installation to the Surgical
Microscope [ } 15] ).
2. Press the button [MENU] on the front panel of the CCU to open the
Setup Menu
.
ð
The
Setup Menu
is shown on the monitor.
3. Press the button [MENU] on the CCU to hide the
Setup Menu
.
7.3.3 Invert Camera Image
To change settings in the setup menu, the menu lock must be deactivated:
1. Open the
Setup Menu
.
2. Select the menu item
Miscellaneous
.
3. Set the value of the menu item
Menu Lock
to
OFF
.
ð The red lock mark in the menu screen disappears.
4. Select the menu item
Picture Setting
.
5. To activate the horizontal image inversion, set the value of the menu item
H Flip
to
ON
.
6. To activate the vertical image inversion, set the value of the menu item
V Flip
to
ON
.
7. To rotate the image by 180°, activate the image inversion around both axes.
8. Confirm the entry by pressing the button [FUNCTION/SET] on the front panel of the CCU.
9. To activate the menu lock, set the value of the menu item
Menu Lock
to
ON
.