Haag-Streit BI 900 Скачать руководство пользователя страница 23

Страница: 23 / 29

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

10.4 Disposal

Electrical and electronic devices must be disposed of separately from

household waste! This device was made available for sale after the

13th August 2005. For correct disposal, please contact your Haag-

Streit representative. This will guarantee that no hazardous

substances enter the environment and that valuable raw materials are

recycled.

10.5 Observed standards

EN 60601-1
EN 60601-1-2
EN ISO 10939
EN ISO 15004-2

10.6 Information and manufacturer's declaration concerning

electromagnetic compatibility (EMC)
10.6.1 General

This device fulfills the requirements on electromagnetic compatibility according to

IEC 60601-1-2:2014 (4th Edition). The device is built so that the generation and

emission of electromagnetic interference is limited to the extent that other devices

are not disturbed in their use in accordance with the regulations and so that the

device itself is suitably immune to electromagnetic interference.

WARNING!

• Electrical medical devices and systems are subject to special EMC

measures and must be installed in accordance with the EMC

instructions contained in this accompanying document.

• Use of accessories, transducers and cables other than those

specified or provided by Haag-Streit could result in increased

electromagnetic emissions or decreased electromagnetic immunity

of this device and result in improper operation.

• Third-party devices may only be connected in compliance with the

IEC 60601-1 standard.

Содержание BI 900






























Результаты поиска

Содержание BI 900

Отзывы:

Бренды по названию

Популярные бренды

Haag-Streit BI 900, Инструкция по эксплуатации

Результаты поиска

Содержание BI 900

Отзывы:

Бренды по названию

Популярные бренды