haacon 1889.5, Руководство по эксплуатации, Страница: 9 / 17

094204_c_gb_hebvrr_v haacon hebetechnik gmbh – Phone +49 (0) 9375 - 84-0 – Fax +49 (0) 9375 - 8466 9
8. Servicing
The lifting device Type 889 is to be inspected by an expert at intervals that depend on the conditions in which it
is used,
but at least once per year (annual safety inspection pursuant to Accident Prevention Directive
BGV 8, §23, Sub-Section 2). In addition to the annual inspection all the safety parts must be tested every ten
years (including all gear parts such as the safety lock, etc.). We recommend that you have this safety check con-
ducted by haacon hebetechnik gmbh.
Experts are persons who, as a result of their training and experience, have adequate knowledge in the field of
winches, lifting and towing equipment and are familiar with the relevant state industrial safety directives, regula-
tions and generally acknowledged rules of engineering (for example DIN EN standards) so that they can assess
the safe condition of winches, lifting and towing equipment.
Servicing work
Description Intervals Parts / Numbers
Grease gear Depending on usage, at
least every month
Grease nipple
Clean and grease gear rack Every month Steel brush,
spray on Gleitmo
Grease all the moving parts of the
suspension construction
Every quarter 55, 56, 57, 59, 69, 75
Shell Alvania R3
9. Spare parts
Only use original spare parts / original wear parts. These parts have been specially designed for the machine.
If you use other parts it cannot be guaranteed that they are designed and built to withstand the stresses safely.
Parts and special equipment that have not been supplied by us have not been approved by us for use on the
lifting device.
Please quote the following to order spare parts:
Type: – See model plate
Factory No: – See model plate
Part No: – See spare parts list / drawing
Description: – See spare parts list / drawing
Spare parts list / drawing
See attachments
10. Dismounting and waste disposal
Safety instructions have to be observed.
The disposal of the product and its components has to be according to environmental standards. –
–