H3C WX5004, Руководство по установке

Страница: 36 / 85

4-1
4
Initial Startup
Setting up the Configuration Environment
Connecting a Configuration Terminal to the Access Controller
For how to connect a configuration terminal to the access controller, refer to section “ Connecting
Interface Cables ” on page 3-13 .
Setting Terminal Parameters
Step1
Start the PC and run the terminal emulation program such as the Terminal of Windows 3.1 or the
HyperTerminal of Windows 95/98/NT/2000/XP.
Step2
Select
Start
>
Program
>
Accessories
>
Communications
>
HyperTerminal
. On the
Connection
Description
interface, type the name of the new connection and click
OK
, as shown in Figure 4-1 .
Figure 4-1
Connection description interface
Step3
The system displays the
Connect To
interface, as shown in Figure 4-2
. From the
Connect using
drop-down list, select the serial interface to be used. (Be sure to select the serial interface to which the
console cable is actually connected.)