5
Rebooting the device
CAUTION:
•
If the main system software image file is corrupted or does not exist, the device cannot
reboot. You must re-specify a main system software image file, or power off the device
and power it again on so the system can reboot with the backup system software image
file.
•
Save your configuration before device reboot to avoid data loss. The device displays
"REBOOT IN ONE MINUTE" appears one minute before it is rebooted.
•
For security purposes, if you are performing file operations at the reboot time, the
system does not reboot.
When upgrading and maintaining the system software image file or the configuration file for the device,
you must reboot the device. To reboot a device, use one of the following methods:
•
Reboot the device immediately at the CLI.
•
Schedule a reboot at the CLI to occur at a specific time and date or after a delay.
•
Power off and then power on the device again. Because this method can cause data loss, H3C
recommends that you use one of the CLI methods.
To reboot the device immediately:
Task Command
Remarks
Reboot the device immediately.
Reboot
Required.
Available in user view.
To schedule a reboot for the device:
Task Command
Remarks
Schedule a reboot.
•
Schedule a reboot to occur at a specific
time and date:
schedule reboot at
hh:mm
[
date
]
•
Schedule a reboot to occur after a delay:
schedule reboot delay
{
hh:mm
|
mm
}
Use either command.
The scheduled reboot function is
disabled by default.
Available in user view.
Содержание WX2540E
Страница 37: ...i Contents Appendix B LEDs 1 LEDs 1...
