H3C WA6600 Series, Руководство по соблюдению требований и безопасности

Страница: 31 / 53

26
•
Consult the dealer or an experienced radio/ TV technician for help.
These products comply with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
If the customer modifies the equipment without the authorization of H3C,
which directly or indirectly contribute to the equipment incompliance with
FCC requirements for Class B digital devices, H3C is not liable for such
interference problem and the expenses incurred there from shall be
covered by the customers.
RF Requirements
1. RF exposure Hazard Warning
This device generates and radiates radio-frequency energy. To ensure
compliance with the requirements of FCC radio-frequency exposure, a
minimum body to antenna distance of 20cm (8 inch) must be maintained
when the device is installed and operated.
2. RF Frequency Requirements
This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or
transmitter.
This device is for indoor use only when it is operated at 5.15 to 5.25GHz
frequency range.
High power radars are allocated as primary users of the 5.25 to 5.35GHz
and 5.65 to 5.85GHz bands. These radar stations can cause interference
with and /or damage this device.
Antennas
Only use the supplied antenna. Unauthorized antennas, modifications or
change to the antennas could violate FCC regulations and void the user’s
authority to operate the equipment.
FDA
These products conform to the applicable requirements of 21 CFR
Subchapter J.