28
Appendix C Converting the AP mode
This feature is available only for APs of version R2442 or later.
Converting the AP mode from the BootWare
menu
61.
Set up the configuration environment as shown in
Figure 16 Setting up the configuration environment
62.
Reboot the AP. The sample output is shown as follows:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* H3C WA6320 BootWare, Version 7.15 *
* *
****************************************************************************
Copyright (c) 2004-2021 New H3C Technologies Co., Ltd.
Compiled Jan 04 2021 16:00:00
Memory Type : DDR4 SDRAM
Memory Size : 512MB
Flash Size : 128MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
63.
Press
Ctrl+B
at the prompt to enter the
EXTENDED-BOOTWARE
menu.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
PC
192.168.0.2/24
192.168.0.50/24
AP
Console
