5
Installing the AP
IMPORTANT:
The AP is typically installed on a high position. H3C recommends that you log in to and configure the AP
before the installation. For more information about logging in to the AP, see “
Logging in to the AP
.”
Figure 3
Installation flowchart
Check before installation
Before installing an AP, perform the following tasks:
•
Connect the AP to the power supply and the network. Examine the LEDs to verify that the AP can
operate correctly. For more information about AP LEDs, see “
Appendix LEDs and ports
.”
•
Verify that cabling on the installation site has been completed.
•
To ensure the PoE performance, H3C recommends that you use GE interfaces for PoE power supply.
•
Record the AP MAC address and serial number marked on the rear of the AP for future use.
Determining the installation position
You can mount the AP to a wall or ceiling. Determine the installation position by observing the following
principles:
Start
Determine the installation
position
Mount the AP to a wall
End
Check before installation
Mount the mounting bracket to
the wall
Install the AP
Connect the AP to the power supply
Connect the AP to the network
Mount the mounting bracket to
the ceiling
Mount the AP to a ceiling
