3-2
z
Keep the AP far away from electronic devices (such as
microwave ovens) that may generate RF noise.
z
Install the AP in a place where it will not hinder people’s daily
work and life.
Make sure the ceiling is strong enough and the structure is suitable in
case of ceiling mounting. Reinforce the ceiling if needed. A padlock is
required for ceiling mounting to prevent any falloff in case of shocks.
A Blossom 071 padlock or similar padlock is recommended.
Installing the AP on a Wall
The following describes how to install a WA2600 series AP on a wall:
z
Installing the Wall-Mounting Bracket on the Wall
z
Installing the AP on the Wall-Mounting Bracket
z
Locking the AP onto the Wall-Mounting Bracket (Optional)
Installing the Wall-Mounting Bracket on the Wall
1) Drill holes 6 mm (0.24 in) in diameter on the wall where the AP is to
be mounted. The drilled holes must correspond to those in the
wall-mounting bracket. There are eight installation holes in total in
the wall-mounting bracket. Select at least four of them for the
installation.