User Manual
H3C VG 10-10/10-11 Voice Gateway
Chapter 4 VG Configuration
4-4
Figure 4-1
Enable DHCP client function to obtain IP address dynamically
II. Static IP mode
You can clear the tick on “Use DHCP” check box in the interface configuration items,
and then the network parameters can be edited.
Figure 4-2 shows the configuration items for specifying static IP address.
Figure 4-2
Interface configuration items
Refer to Table 4-2 for detailed description on the parameters to be configured.
Table 4-2
Description on interface parameters
Configuration
item
Description
Type
IP Address
The IP address of the voice gateway
Required
IP Mask
Subnet mask
Required
Default gateway IP The IP address of the default gateway
Optional
