83
Figure 102 Removing the diagnostic panel blank
{
For the 12LFF server, remove the drive from the diagnostic panel slot at the top left or
bottom right. For more information about the location of the diagnostic panel slot, see "Front
panel view." For more information about removing a drive, see "
8.
For an 8LFF or 12LFF server with the BP-12LFF-R4900 drive backplane, install the diagnostic
panel as follows:
a.
Connect one end of the cable (P/N
0404A0T1
) to the diagnostic panel, as shown in
.
Figure 103 Connecting the diagnostic panel cable
b.
Push the diagnostic panel into the slot until it snaps into place, as shown in
.
Figure 104 Installing the LFF diagnostic panel
