H3C UniServer R4900 G3, Руководство пользователя

Страница: 71 / 299

62
b.
Insert the mLOM Ethernet adapter into the slot along the guide rails and then fasten the
captive screws to secure the Ethernet adapter into place, as shown in
Figure 77 .
Some mLOM Ethernet adapters have only one captive screw. This example uses an mLOM
with two captive screws.
Figure 77 Installing an mLOM Ethernet adapter
3.
Connect network cables to the mLOM Ethernet adapter.
4.
Connect the power cord. For more information, see " Connecting the power cord ."
5.
Power on the server. For more information, see " Powering on the server ."
Verifying the installation
Log in to HDM to verify that the mLOM Ethernet adapter is operating correctly. For more information,
see HDM online help.
Installing a PCIe Ethernet adapter
Procedure
1.
Power off the server. For more information, see " Powering off the server ."
2.
Remove the server from the rack. For more information, see " Removing the server from a rack ."
3.
Remove the access panel. For more information, see " Replacing the access panel ."
4.
Install the PCIe Ethernet adapter. For more information, see " Installing riser cards and PCIe
modules ."
5.
Connect network cables to the PCIe Ethernet adapter.
6.
Install the access panel. For more information, see " Replacing the access panel ."
7.
Rack-mount the server. For more information, see " Rack-mounting the server ."
8.
Connect the power cord. For more information, see " Connecting the power cord ."
9.
Power on the server. For more information, see " Powering on the server ."
Verifying the installation
Log in to HDM to verify that the PCIe Ethernet adapter is operating correctly. For more information,
see HDM online help.