47
Figure 55 Installing a Mezzanine storage controller
8.
(Optional.) Install the flash card of the power fail safeguard module to the storage controller:
IMPORTANT:
Skip this step if no power fail safeguard module is required or the storage controller has a
built-in flash card. For information about storage controllers with a built-in flash card, see
"Storage controllers."
a.
Install the two internal threaded studs supplied with the power fail safeguard module on the
Mezzanine storage controller, as shown in
.
Figure 56 Installing the internal threaded studs
b.
Slowly insert the flash card connector into the socket and use screws to secure the flash
card on the storage controller, as shown in
