H3C UniServer R4300 G5, Руководство пользователя

Страница: 55 / 167

46
b. Lift the retaining bracket to remove it from the heatsink, as shown by callout 2 in Figure 43 .
Figure 43 Removing the retaining bracket
8. Use isopropanol wiping cloth to clear the residual thermal grease from the processor top and
heatsink, as shown in
Figure 44 .
Figure 44 Clearing the residual thermal grease
Installing a processor
1. Install the retaining bracket onto the heatsink:
a. Close the ejector lever on the retaining bracket for secure installation of the processor.
b. Align the alignment triangle on the retaining bracket with the cut-off corner of the heatsink.
Place the bracket on top of the heatsink, with the four corners of the bracket clicked into the
four corners of the heatsink, as shown in
Figure 45 .
For the processor to be installed correctly, make sure the locking lever on the retaining
bracket is closed as shown in
Figure 46.