H3C UniServer R2700 G3, Руководство пользователя, Страница: 44 / 226

6-8
Figure 6-13 Installing the PCIe module
6.
Remove the blank on PCIe riser connector 1, as shown in Figure 6-14 .
Figure 6-14 Removing the riser card blank on PCIe riser connector 1
7.
Install the riser card on the PCIe riser connector, with the two tabs on the card aligned with the
notches in the chassis, as shown in
Figure 6-15 .
IMPORTANT:
Make sure the riser card is securely installed. The server cannot be powered up if the
connection is loose.