H3C UniServer BX1010E, Руководство пользователя

Страница: 15 / 48

3
Parameter Setting
resides
Data in this table is used as an example.
2. Log in to the OM Web interface.
a. As shown by callout 1 in Figure 2 open your browser on your PC and enter the OM Web
management IP (in the format of https:// OM_ip_address )
b. As shown by callout 2 in, Figure 2 enter the username and password.
c. As shown by callout 3 in, Figure 2 click Login .
Figure 2 Logging in to the OM Web interface
3. Perform the following operations to power off the switch module.
a. Click Interconnect Module Management .
b. Select the target switch module.
c. Click Virtual Power and then select Power Off .
d. Click OK .
Powering off the switch module from the OM CLI
1. Open a remote access program, set the SSH login parameters, and log in to the OM CLI.
Table 7 SSH login parameters
Parameter Setting
Protocol SSH
Port number 22
OM management IP
•
Management IP address (default):
192.168.100.100
•
Subnet mask (default): 255.255.255.0