H3C UniServer BT716F, Руководство пользователя

Страница: 38 / 44

6-4
Figure 6-3 Setting up the hardware environment
(2) Set the login parameters and log in to the OM CLI using the remote access software. Table
6-2 lists the login parameters.
Table 6-2 SSH login parameters
Parameter Value
Protocol SSH
Port number 22
Management IP address of the OM module
•
Management IP address (default):
192.168.100.100
•
Subnet mask (default): 255.255.255.0
User name and password used to log in to the
OM module
•
User name (default): admin
•
Password (default): Password@_
•
By default, the SSH access mode for the OM module is enabled.
(1) After login, the OM CLI displays the login page, as shown below.
******************************************************************************
* Copyright (c) 2004-2019 New H3C Technologies Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
<OM>
PC
LAN
Enclosure