H3C UniServer BT716F, Руководство пользователя

Страница: 19 / 44

2-10
Table 2-5 Correspondence between external interfaces of the straight-through module and the
blade servers
Model of Blade Server
Maximum Number of
Supported Mezz NICs
Correspondence between external
interfaces of the straight-through module and
the blade servers
Half-width single-height blade
server
3
See 2.5.3 1. Correspondence between
external interfaces of the straight-through
module and the half-width single-height
blade server
.
Full-width single-height blade
server
6
See 2.5.3 2. Correspondence between
external interfaces of straight-through
module and full-width single-height blade
server (supports up to 6 Mezz NICs).
3
See 2.5.3 3. Correspondence between
external interfaces of straight-through
module and full-width single-height blade
server (supports up to 3 Mezz NICs).
When both full-width single-height blade servers and half-width single-height blade servers are used in a blade
enclosure, check the corresponding external interface of the straight-through module according to the actual
blade server type configured in each slot.
1. Correspondence between external interfaces of the straight-through module and the half-width
single-height blade server
Figure 2-3 shows the 16 FC interfaces on the straight-through module panel, which are numbered
from 1 to 16. Figure 2-7 shows the 16 slots of the half-width single-height blade server installed in
the front slots of the blade server chassis. The slots are numbered 1 to 16.
Figure 2-7 Numbering of slots for the half-width single-height blade server