7
Table 4 Description of front panel components
Item
Description
1
•
Optional riser card (for processor 2)
2
Optional SAS/SATA drive or NVMe drive
3
Optional SAS/SATA drive or SATA M.2 SSD module (via the adapter module)
4
Pull-out asset label
5
USB 3.0 port
6
Buttons for releasing the locking levers
7
Locking levers
8
SUV connector
•
USB 3.0 ports can be used to connect the USB flash drive, USB keyboard or mouse, USB optical drive
(for OS installation).
LEDs and buttons
Figure 4 Front panel LEDs and buttons
Table 5 Front panel LEDs
SN
Description
Status
1
UID button/LED
•
Steady blue
—UID LED is activated. The UID LED can be
activated by using the following methods:
Press the UID button LED.
Activate the UID LED from HDM or OM.
•
Flashing blue
:
1 Hz
—The upgrade is being upgraded or the system is being
managed from HDM. Do not power off the server.
4 Hz
—HDM is restarting. To restart HDM, press the UID
button LED for ten seconds.
•
Off
—UID LED is not activated.
2
Health LED
•
Steady green
—The system is operating correctly.
•
Flashing green (4 Hz)
—HDM is initializing.
•
Flashing amber (0.5 Hz)
—A predictive alarm is present.
•
Flashing amber (1 Hz)
—A minor alarm is present.
