5
2.
Drill four holes with a diameter of 6 mm (0.24 in) and a depth of 30 mm (1.18 in) at the marked
locations.
Figure 6 Drilling holes in the wall
3.
Insert a screw anchor into each hole and tap it with a rubber hammer until it is flush with the
wall surface.
Figure 7 Hammering the anchor
4.
Fasten a screw into each screw anchor. Do not fasten the screws all the way in. Leave a space
of 2.5 to 4.5 mm (0.10 to 0.18 in) for AP mounting.
Figure 8 Fastening screws into the wall
30 mm
(1.18 in)
