1
H3C T300M-X-S Outdoor Enclosure Installation Quick Start-AP101
H3C T300M-X-S
室外机壳 快速安装指南
-AP101
Tool list
工具参考
Introduction to installation accessories
安装附件介绍
RJ-45 straight-through
Ethernet cable × 4
RJ-45
直通以太网线缆
× 4
The installation tools are not provided with the enclosure. Prepare them yourself.
设备不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。
2
Removing the protective cover from the enclosure
拆卸
T300M-X-S
产品外壳
Use a Phillips screwdriver to remove the six mounting screws on the enclosure, and then remove the
protective cover. Keep the screws safe for future use.
使用十字螺丝刀逆时针拧下设备前面板的六颗螺钉，并妥善保存，取下设备外壳。
Phillips screwdriver
十字螺丝刀
Ladder
梯子
Network cable tester
测线仪
Needle-nose pliers
尖嘴钳
Wire-stripping pliers
剥线钳
Wire crimper
压线钳
Band clamp × 2
喉箍
× 2
RJ-45 straight-through
Ethernet cable (user supplied)
RJ-45
直通以太网线缆（用户自备）
Flat-head screwdriver
一字螺丝刀
Screw anchor and screw
壁挂螺钉和膨胀管
Hammer
橡胶锤
Hammer drill
冲击钻
Marker
记号笔
1
2
M4 × 8 screw × 4
M4×8
螺钉
× 4
M3 × 6 screw × 2
M3×6
螺钉
× 2
Grounding cable
(user supplied)
接地线（用户自备）
Pole-mounting bracket
抱杆支架
Installing the pole-mounting bracket to the enclosure
安装
T300M-X-S
产品抱杆支架
Use M3 × 6 screws to attach the pole-
mounting bracket to the rear panel of the
enclosure.
使用
M3x6
螺钉将抱杆支架固定到设备背部。
1
2
3
