H3C SR8800-X, Быстрый старт, Страница: 14 / 21

12
Table 12 Command output
Field Description
System state
Operating status summary of all CPUs:
•
Stable —All CPUs are operating stably.
•
Not ready —A minimum of one CPU is not operating stably.
Redundancy state
Redundancy status:
•
Stable —Both MPUs are operating stably. You can perform a switchover.
•
No redundance —The system has only one MPU. You cannot perform a
switchover.
•
Not ready —The system is not operating stably. You cannot perform a
switchover.
NSR state
Readiness of modules for nonstop routing (NSR):
•
Stable —NSR is operating correctly.
•
Not ready —NSR is not operating correctly. You cannot perform a
process or active/standby switchover.
Role
Role of the card in the system:
•
Active —The card is the active MPU.
•
Standby —The card is the standby MPU.
•
Other —The card is a service module.
State
Card status:
•
Stable —The card is operating stably.
•
Board inserted —The card has just been installed.
•
Kernel initiating —Card kernel is being initialized.
•
Service starting —Services are starting.
•
Service stopping —Services are stopping.
•
HA Batch backup —An HA batch backup is going on.
•
Interface data batch backup —An interface data batch backup is in
progress.
•
Service module data batch backup —A service module data batch
backup is in progress.
*
The object is not operating stably.
If an exception has occurred, record the failure information immediately and contact H3C Support.