4
Configuring authentication on a user interface
You can configure authentication on a user interface to control access to the router.
describes the Telnet login authentication methods available for a VTY user interface.
Table 1 Telnet login authentication methods
Authentication
method
Feature
Application scenarios
None
Easy to configure, allows any user to Telnet to
your router, and lowest in security
Lab environments and extremely
secure network environments
Password
Easy to configure, secure, and flat user
management
Environments that do not need
granular privilege management
Username and
password
Complex to configure, secure, and hierarchical
user management
Environments where multiple
operators cooperate to manage
the router
For more information about login methods, see login management in
H3C SR8800-F Routers
Fundamentals Configuration Guide
.
Verifying the network configuration
Execute
display
commands in any view.
Task
Command
Display the name, model, and running operating
system version of the router
display version
Display the current configuration of the router
display current-configuration
Display the interface status and configuration
display interface brief
Display the IP configuration information of the
specified or all Layer 3 interfaces
display ip interface brief
Display information about active routes in the routing
table
display ip routing-table
Display neighbor discovery protocol (NDP)
configuration information
display ndp
Connecting the router to the network
Before you connect the router to the network, configure basic settings for the router. For more
information, see login management in
H3C SR8800-F Routers
Fundamentals Configuration Guide
.
Connecting your router to the network through twisted pair
cables
The router provides 10/100BASE-TX and 1000BASE-T ports. These ports use RJ-45 connectors
and support auto-MDI/MDI-X. Use twisted pair cables of category-5 or above to connect the Ethernet
ports of your router to the network. For more information about twisted pair cables, see "Ethernet
twisted pair cable."
Содержание SR8800-F
Страница 49: ...6 debugging commands in H3C SR8800 F Routers Network Management and Monitoring Command Reference ...
Страница 126: ...6 Figure 4 E1 cable 1 HM96 RJ 45 ...
Страница 127: ...7 Figure 5 E1 cable 2 HM96 SMB ...
Страница 148: ...12 Figure 14 Example of a device label ...