H3C SR6608/6604 Routers Installation Manual
Chapter 1 Router Overview
1-13
IV. Slots
FIP-100 provides four MIM slots for some H3C legacy MIMs.
The MIM slots on FIP-100 are numbered 1 to 4 from the bottom up and from right to left,
as shown in Figure 1-9.
(1) Interface module slot 1
(2) Interface module slot 2
(3) Interface module slot 3
(4) Interface module slot 4
Figure 1-9
Interface module slots on FIP-100
Note:
The numbers 1 through 4 in Figure 1-9 represent Slot 1 through Slot 4 respectively.
Actually, these numbers are not silk-screened on an FIP-100.
1.3.3 FIP-200
I. Introduction
Flexible interface platform-200 (FIP-200), another type LPU of the device, provides a
high-speed service processing capability. FIP-200 supports SR66 series HIMs and
some H3C legacy MIMs and provides two Combo interfaces. In consideration of the
smooth upgrade requirements, FIP-200 supports two HIMs or two MIMs, or intermixing
of an HIM and an MIM. FIP-200 is hot-swappable.
(1) Slot 1
(2) Slot 2
(3) 10/100/1000 Mbps electrical Ethernet interface 0
(4) 1000 Mbps optical Ethernet interface 0
(5) 1000 Mbps optical Ethernet interface 1
(6) 10/100/1000 Mbps electrical Ethernet interface 1
(7) OPEN BOOK sign
Figure 1-10
Front view of FIP-200
