H3C SR6602-X1, Руководство по установке, Страница: 18 / 102

9
Unpacking the router
Unpack the router as shown in Figure 4 .
Figure 4 Unpacking the router
Installing the router in a 19-inch rack
Before you install the router to a rack, wear an ESD wrist strap. For how to wear an ESD wrist strap,
see “
ESD prevention .” The SR6602-X1 and SR6602-X2 are installed in the same way. The
SR6602-X1 is used as an example in this section.
To install the router in a rack:
1.
Mark the positions of cage nuts on the front rack posts by using a front mounting bracket and
mark the positions of cage nuts on the rear rack posts by using a rear mounting bracket.
See
Figure 5 .
Figure 5 Marking the positions of the cage nuts
2.
Insert one edge of a cage nut into the hole, and use a flat-blade screwdriver to compress the
other edge of the cage nut to push the cage nut fully into the hole.
Figure 6 Installing cage nuts
3.
Install the cable management brackets. See Figure 7 .
1RU
2RU
2 1