21
Figure8-2 Installing a MIC-X interface card
7.
Install the FIP with the MIC-X interface card in the target slot on the device. For the installation
procedure, see "
Installing a FIP module
CAUTION:
•
The FIP modules are hot swappable.
•
If you are to install a MIC-X interface card on the device, first install it on a FIP module, and then
install the FIP module with it on the device.
To install a FIP module:
1.
(Optional.) Install MIC-X interface cards on the FIP module. For the MIC-X interface card
installation procedure, see "
Installing MIC-X interface cards
2.
Wear an ESD wrist strap and make sure the strap makes good skin contact and is reliably
grounded.
3.
Face the front panel of the device, use a Phillips screwdriver to loosen the captive screws on
the filler panel, and then remove the filler panel.
Figure8-3 Removing the filler panel
