3
count
: Displays the number of ARP flood suppression entries that match the command.
Examples
# Display ARP flood suppression entries.
<Sysname> display arp suppression vsi
IP address MAC address Vsi Name Link ID Aging
1.1.1.2 000f-e201-0101 vsi1 0x5000000 14
1.1.1.3 000f-e201-0202 vsi1 0x5000001 18
1.1.1.4 000f-e201-0203 vsi2 0x5000000 10
# Display the number of ARP flood suppression entries.
<Sysname> display arp suppression vsi count
Total entries: 3
Table 1 Command output
Field
Description
Link ID
Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.
Aging
Remaining lifetime (in minutes) of the ARP flood suppression entry. When
the timer expires, the entry is deleted.
Related commands
arp suppression enable
reset arp suppression vsi
display l2vpn interface
Use
display l2vpn interface
to display L2VPN information for Layer 3 interfaces that are
mapped to VSIs.
Syntax
display l2vpn interface
[
vsi
vsi-name
|
interface-type
interface-number
]
[
verbose
]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vsi vsi-name
: Specifies a VSI name, a case-sensitive string of 1 to 31 characters.
interface-type interface-number
: Specifies an interface by its type and number.
verbose
: Displays detailed information about Layer 3 interfaces. If you do not specify this keyword,
the command displays brief information about Layer 3 interfaces.
