H3C SOHO IE4300, Справочник по командам

Страница: 730 / 3296

5
Usage guidelines
If no IP address range is specified, all IP addresses in the subnet specified by the
network
command in address pool view are assignable. If an IP address range is specified, only the IP
addresses in the IP address range are assignable.
After you use the
address range
command, you cannot use the
network secondary
command to specify a secondary subnet in the address pool.
If you execute this command multiple times, the most recent configuration takes effect.
The address range specified by the
address range
command must be within the subnet specified
by the
network
command. The addresses outside of the subnet cannot be assigned.
Examples
# Specify an address range of 192.168.8.1 through 192.168.8.150 in address pool 1.
<Sysname> system-view
[Sysname] dhcp server ip-pool 1
[Sysname-dhcp-pool-1] address range 192.168.8.1 192.168.8.150
Related commands
class
dhcp class
display dhcp server pool
network
bims-server
Use bims-server to specify the IP address, port number, and shared key of the BIMS server in a
DHCP address pool.
Use
undo bims-server
to restore the default.
Syntax
bims-server ip ip-address [ port port-number ] sharekey { cipher | simple }
string
undo bims-server
Default
No BIMS server information is specified.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
ip ip-address
: Specifies the IP address of the BIMS server.
port port-number : Specifies the port number of the BIMS server, in the range of 1 to 65534.
cipher
: Specifies a key in encrypted form.
simple
: Specifies a key in plaintext form. For security purposes, the key specified in plaintext form
will be stored in encrypted form.