16
Figure 20 Connecting the AP to a power injector and to the network through the Ethernet
copper port
Table 2 Dual-port H3C power injector description
Item Specifications
Model ADP060-55V-PoE-GL
Input
100 V – 240 V @ 1.5 A
Output
55 V @ 1100 mA
Connecting the AP to a power injector and to the network through the fiber port
IMPORTANT:
To use a pigtail fiber that does not have any protective sleeve, first use liquid-tight tape to encase the
exposed fiber part before you connect the fiber.
To connect the AP to a power injector and to the network through the fiber port:
1.
Connect the SFP port on the AP to an Ethernet switch or access controller.
Figure 21 Connecting an optical fiber to the SFP port on the AP
2.
Connect the power cord of the injector to an AC power source.
GE1
PoE1
LAN1
