13
Parameter
Description
The value is an integer equal to or larger than 1024. The default value is
1024. If the value is 1024, the message is not fragmented.
enable_l3_router_rpc_notify
Whether to enable or disable the feature of sending Layer 3 routing events
through RPC.
•
True
—Enable.
•
False
—Disable.
qos_rx_limit_min
Minimum inbound bandwidth, in kbps. If the QoS minimum inbound
bandwidth configured on OpenStack is smaller than this parameter value,
this parameter value takes effect.
Only the Kilo 2015.1 plug-in supports this parameter.
cloud_region_name
Name of the cloud platform. String type. The default value is default. Make
sure the value of this parameter is the same as the cloud platform name
configured on the
Virtual Networking
>
OpenStack
page on
SeerEngine-DC.
Upgrading the SeerEngine-DC Neutron plug-ins
CAUTION:
•
Services might be interrupted during the SeerEngine-DC Neutron plug-ins upgrade procedure.
Make sure you understand the impact of the upgrade before performing it on a live network.
•
The plug-ins settings will not be restored automatically after an upgrade in the Kolla environment.
Before an upgrade, back up the settings in the
/etc/kolla/neutron-server/neutron.conf
and
/etc/kolla/neutron-server/ml2_conf.ini
configuration files. After the upgrade, modify the
parameter settings according to the configuration files to ensure configuration consistency before
and after the upgrade.
To upgrade the SeerEngine-DC Neutron plug-ins, just install the new version of the plug-ins. For
information about installing the SeerEngine-DC Neutron plug-ins, see "
Installing the SeerEngine-DC Neutron security
plug-in on OpenStack
The SeerEngine-DC Neutron security plug-in can be installed on multiple versions of OpenStack.
This section uses OpenStack Pike as an example to describe the security plug-in installation.
The SeerEngine-DC Neutron security plug-in is installed on the OpenStack controller node. Before
installation, set up the base environment on the node.
Installing the security plug-in on the controller node
Obtaining the installation package
Obtain and copy the security plug-in installation package of the required version to the target
installation directory on the server or virtual machine.
Alternatively, transfer the installation package to the target installation directory through a file transfer
protocol such as FTP, TFTP, or SCP.
