H3C SecPath PFC, Быстрый старт

Страница: 16 / 25

9
Figure 6 Install the PFC to the rack
Placing the PFC on a Workbench
Without a standard 19-inch rack, you can place the PFC on a clean
workbench. Make sure that:
•
The workbench is long and wide enough to hold the PFC. See Table 2
for the physical dimensions of PFC.
•
The workbench is sturdy and well grounded.
•
The workbench is firm enough to support the weight of the PFC and
other installation accessories.
•
There is a clearance of 10 cm (3.94 in.) around the chassis for heat
dissipation.