H3C SecPath M9000 Series Скачать руководство пользователя страница 4

Страница: 4 / 4

Manual version: APW100-20200316

BOM: 3123A1Y9

Place the module on an anti-static workbench or put it in an anti-static bag, with the component
side facing up.

If you are not to install a new module, install a filler panel in the slot to prevent dust and ensure
good ventilation in the device.

The information in this document is subject to change without notice.

Содержание SecPath M9000 Series

Страница 1: ...rt CONSOLE 2 Status LEDs 3 Captive screw 4 Ejector lever Table 1 Module specifications Item Specification Dimensions H W D 40 426 298 mm 1 57 16 77 11 73 in Power consumption 101 W to 135 W Weight 2 7...

Страница 2: ...the upper or lower limit Off Off The switching fabric module has not started On Off The switching fabric module is starting up 5 Installing and removing the module CAUTION Wear a reliably grounded ESD...

Страница 3: ...3 Closing the ejector levers 6 Use a Phillips screwdriver to fasten the captive screws on the module 5 2 Removing the module 1 Use a Phillips screwdriver to loosen the captive screws on the module un...

Страница 4: ...t in an anti static bag with the component side facing up If you are not to install a new module install a filler panel in the slot to prevent dust and ensure good ventilation in the device Copyright...