13
Usage guidelines
This command excludes a remote MAC address from the flood suppression done by using the
flooding disable
command. The VTEP will flood the frames destined for the specified MAC
address to remote sites when unknown-unicast floods are confined to the local site.
Examples
# Enable selective flood for
000f-e201-0101
on VSI
vsi1
.
<Sysname> system-view
[Sysname] vsi vsi1
[Sysname-vsi-vsi1] selective-flooding mac-address 000f-e201-0101
Related commands
flooding disable
shutdown
Use
shutdown
to shut down a VSI.
Use
undo shutdown
to bring up a VSI.
Syntax
shutdown
undo shutdown
Default
VSIs are not manually shut down.
Views
VSI view
Predefined user roles
network-admin
context-admin
Usage guidelines
Use this command to temporarily disable a VSI to provide Layer 2 switching services. The shutdown
action does not change settings on the VSI. You can continue to configure the VSI. After you bring up
the VSI again, the VSI provides services based on the latest settings.
Examples
# Shut down VSI
vpn1
.
<Sysname> system-view
[Sysname] vsi vpn1
[Sysname-vsi-vpn1] shutdown
Related commands
display l2vpn vsi
tunnel
Use
tunnel
to assign a VXLAN tunnel to a VXLAN.
Use
undo tunnel
to remove a VXLAN tunnel from a VXLAN.
