H3C SECPATH 5080F-CMW710-R9628P2414 страница 37 Скачать руководство пользователя

Страница: 37 / 65

Update extended bootrom success!

Update bootrom success!

Execute the

reboot

command to reboot the device.

Upgrading BootWare from BootWare menus

To upgrade the BootWare image from BootWare menus, use one of the following methods:



Using TFTP to upgrade BootWare through the management Ethernet port



Using FTP to upgrade BootWare through the management Ethernet port

For more information about BootWare menus, see "

Using BootWare menus

NOTE:

This section uses the MPU as an example to describe how to upgrade BootWare.

Preparing for the upgrade

Connect the MPU's console port to the configuration terminal.

Connect the MPU's management Ethernet port to the TFTP or FTP file server.

The TFTP or FTP server can be co-located with the configuration terminal (typically, a PC).

Prepare the upgrade file:



If you are using TFTP, store the upgrade file on the TFTP server, and specify the file
directory.



If you are using FTP, store the upgrade file on the FTP server, and specify the file directory,
FTP username, and password.

Run the terminal emulation program on the configuration terminal.

Power on the device, and then press

Ctrl+B

within 5 seconds at prompt to access the

EXTEND-BOOTWARE menu (see "

Using the EXTENDED-BOOTWARE menu

").

Using TFTP to upgrade BootWare through the management Ethernet port

Enter

in the BootWare menu to access the BootWare Operation submenu.

=========================<BootWare Operation Menu>==========================

|Note:the operating device is sda0 |

|<1> Backup Full BootWare |

|<2> Restore Full BootWare |

|<3> Update BootWare By Serial |

|<4> Update BootWare By Ethernet |

|<0> Exit To Main Menu |

============================================================================

Enter your choice(0-4):

Enter

in the BootWare Operation submenu to enter the Ethernet submenu.

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================

|<1> Update Full BootWare |

|<2> Update Extended BootWare |

|<3> Update Basic BootWare |

|<4> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

============================================================================

Enter your choice(0-4):

Содержание SECPATH 5080F-CMW710-R9628P2414


































































Результаты поиска

Содержание SECPATH 5080F-CMW710-R9628P2414

Отзывы:

Похожие инструкции для SECPATH 5080F-CMW710-R9628P2414

Бренды по названию

Популярные бренды

H3C SECPATH 5080F-CMW710-R9628P2414, Руководство пользователя

Результаты поиска

Содержание SECPATH 5080F-CMW710-R9628P2414

Отзывы:

Похожие инструкции для SECPATH 5080F-CMW710-R9628P2414

Бренды по названию

Популярные бренды