137
Figure 45
SSH client configuration interface 2)
Click
Open
. If the connection is normal, you will be prompted to enter the username. After
entering the correct username (
client002
), you can enter the configuration interface. See Figure
45.
SSH client configuration examples
By default, Ethernet interfaces, VLAN interfaces, and aggregate interfaces are in the state of DOWN. To
configure such an interface, use the
undo shutdown
command to bring it up first.
When switch acts as client for password authentication
Network requirements
•
Switch A (the SSH client) needs to log into Switch B (the SSH server) through the SSH
protocol. See Figure 46.
•
The username of the SSH client is
client001
and the password is
aabbcc
. Password
authentication is required.
