H3C S7506 Скачать руководство пользователя страница 14

Страница: 14 / 17

Power Distribution Box Installation Guide
H3C S7503-S7506-S7506R Ethernet Switches

1-10

Step 2: Turn off the power switch on the chassis. If an AC power

distribution box is used, unplug AC power cable from the chassis; if a

DC power distribution box is used, unplug the DC power cable.

Step 3: Unscrew the captive screws (as shown in Figure 1-12) on

the power modules on the front panel of the chassis with a screwdriver,

remove the air filter, and pull out the power modules by the handle

behind the air filter.

Step 4: Unscrew the grounding screw on the power distribution

box at the back of the chassis with a screwdriver and remove the

ground wire.

Step 5: Unscrew the four captive screws on the power distribution

box at the rear of the chassis with a screwdriver.

Step 6: Pull out the power distribution box from the rear of the

chassis along the slot. If you find it difficult to pull out the power

distribution box, reach for it through the power module slot from the

front of the chassis and push it out.

Caution:

It is difficult to remove a power distribution box with a power module

plugged into it; therefore, remove power modules before removing the

power distribution box.

Содержание S7506

















