H3C S7500E-XS Series, Руководство по настройке интерфейса

Страница: 24 / 30

17
Step Command Remarks
2. Enter Ethernet
interface view.
interface interface-type interface-number N/A
3. Set the MTU of the
Ethernet interface.
mtu size
The default setting is 1500
bytes.
Displaying and maintaining an Ethernet interface
Execute display commands in any view and reset commands in user view.
Task Command
Display interface traffic statistics.
display counters { inbound | outbound } interface
[ interface-type [ interface-number ] ]
Display traffic rate statistics of interfaces
in up state over the last statistics polling
interval.
display counters rate { inbound | outbound } interface
[ interface-type [ interface-number ] ]
Display the operational and status
information of the specified interfaces.
display interface [ interface-type ] [ brief [ down ] ]
display interface [ interface-type [ interface-number ] ] [ brief
[ description ] ]
Display information about dropped
packets on the specified interfaces. display packet-drop { interface [ interface-type
[ interface-number ] ] | summary }
Display information about storm control
on the specified interfaces. display storm-constrain [ broadcast | multicast | unicast ]
[ interface interface-type interface-number ]
Display the Ethernet statistics.
display ethernet statistics slot slot-number
Clear interface statistics. reset counters interface [ interface-type [ interface-number ] ]
Clear the statistics of dropped packets
on the specified interfaces. reset packet-drop interface [ interface-type
[ interface-number ] ]
Clear the Ethernet statistics. reset ethernet statistics slot slot-number