H3C S6861 Series, Руководство по установке, Страница: 47 / 62

40
Figure 55 Rear panel
(1) System status LED (SYS)
(2) LINK/ACT LED for the copper management
Ethernet port
(3) LINK/ACT LED for the fiber management
Ethernet port
(4) Fan tray 1
(5) Fan tray 2 (6) Fan tray 3
(7) Fan tray 4 (8) Power module 1
(9) Power module 2 (10) Fiber management Ethernet port
(11) Copper management Ethernet port (12) Console port
(13) Mini USB console port (14) USB port
An S6861-30QF switch comes with power module slot PWR1 empty and power module slot PWR2
installed with a filler panel. In
Figure 49 , two PSR450-12A power modules are installed in the power
module slots. For more information about installing and removing a power module, see " Installing
and removing a power module ."
An S6861-30QF switch comes with the four fan tray slots empty. You must install four fan trays of the
same model for the switch. In
Figure 49 , four LSPM1FANSA fan trays are installed in the fan tray
slots. For more information about installing and removing a fan tray, see " Installing and removing a
fan tray ."
Figure 56 Left side panel
(1) Primary grounding point (2) Auxiliary grounding point
Technical specifications
Table 7 Technical specifications
Item S6861-54QF S6861-30QF S6861-54QT
Dimensions
(H × W × D) 44 × 440 × 400 mm (1.73 ×
17.32 × 15.75 in) 44 × 440 × 400 mm (1.73 ×
17.32 × 15.75 in) 44 × 440 × 460 mm (1.73 ×
17.32 × 18.11 in)
Weight ≤ 10 kg (22.05 lb) ≤ 10 kg (22.05 lb) ≤ 10 kg (22.05 lb)