H3C S6300 Series, Руководство по устранению неисправностей

Страница: 11 / 32

8
2. Verify that the ACL is configured correctly.
Execute the
display acl
command to check whether the ACL is configured correctly.

If the ACL is configured incorrectly, reconfigure it.

If the ACL is configured correctly, go to step 3 .
3. If the issue persists, contact H3C Support.
ACL used in a packet filter
To resolve the issue when the ACL is used in a packet filter:
1. Verify that the packet filter is configured correctly.
Execute the
display packet-filter
command to check whether the packet filter is
configured correctly.

If there are any configuration errors, reconfigure the packet filter.

If there is no configuration error, go to step 2 .
2. Verify that the ACL is configured correctly.
Execute the
display acl
command to check whether the ACL is configured correctly.

If the ACL is configured incorrectly, reconfigure it.

If the ACL is configured correctly, go to step 3 .
3. If the issue persists, contact H3C Support.
Related commands
This section lists the commands that you might use for troubleshooting ACLs.
Command Description
display packet-filter
Displays whether an ACL has been successfully applied to
an interface for packet filtering.
display qos-acl resource Displays QoS and ACL resource usage.
display qos policy control-plane
Displays information about the QoS policies applied to the
specified control plane.
display qos policy global Displays information about global QoS policies.
display qos policy interface
Displays information about the QoS policies applied to an
interface or to all interfaces.
display qos vlan-policy Displays information about QoS policies applied to VLANs.
display traffic classifier
user-defined
Displays traffic class configuration.
display traffic behavior
user-defined
Displays traffic behavior configuration.