H3C S5830V2 series, Руководство по настройке, Страница: 271 / 318

254
• In IEEE Std 802.1Qaz-2011:
{
ETS Configuration
{
ETS Recommendation
{
PFC
{
APP
H3C devices can send these types of DCBX information to a server's or disk device's adapter supporting
FCoE, but they cannot accept them.
DCBX configuration task list
Tasks at a glance
(Required.) Enabling LLDP and DCBX TLV advertising
(Required.) Configuring APP parameters
(Required.) Configuring ETS parameters:
•
Configuring the 802.1p-to-local priority mapping
•
Configuring group-based WRR queuing
(Required.) Configuring PFC parameters
(Optional.) Configuring the DCBX version
Enabling LLDP and DCBX TLV advertising
To enable the device to advertise APP, ETS, and PFC data through an interface, perform the following
tasks:
• Enable LLDP globally.
•
Enable LLDP and DCBX TLV advertising on the interface.
To enable LLDP and DCBX TLV advertising:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enable LLDP globally.
lldp global enable
By default:
•
If the switch starts up with
empty configuration, LLDP
is disabled globally (initial
setting).
•
If the switch starts up with
the default configuration
file, LLDP is enabled
globally (factory default).
For more information about
empty configuration and the
default configuration file, see
Fundamentals Configuration
Guide .