The S5830 Switch Series adopts the front-to-back airflow design and airflow redirection.
You can choose different fan trays to direct airflow from port side to power module side
or from power module side to port side for different installation sites. S5830
系列交换机
采用前后风道设计，并支持风向倒转能力，通过配置不同的风扇模块，可提供
“
端口侧到
电源侧
”
和
“
电源侧到端口侧
”
两种气流方向，满足不同环境下的散热要求。
Uses the LSVM152SCFAN fan tray
LSVM152SCFAN
Uses the LSVM252SCFAN fan
tray
LSVM252SCFAN
Uses the LSVM1106SFAN fan tray
LSVM1106SFAN
Uses the LSVM2106SFAN fan tray
LSVM2106SFAN
Installing and removing the modules
模块的安装与拆卸
Install and remove a power module (S5830-52SC)
(S5830-52SC)
Install a power module
安装
Remove a power module
拆卸
Remove the filler panel from the slot where you want to install a module.
安装模块前，请先取下假面板。
1
2
Install and remove a power module (S5830-106S)
(S5830-106S)
5
Install and remove a fan tray (S5830-52SC)
S5830-52SC
Install a fan tray
安装
Remove a fan tray
拆卸
Install and remove an interface card (S5830-52SC)
( S5830-52SC
)
Install an interface card
安装
Remove an interface card
拆卸
Before installing the fan tray, make sure that the airflow direction marked on the fan tray
meets the ventilation requirement of the installation site.
在安装风扇模块前，请根据风扇
模块的风向指示，确认气流方向和安装环境的通风要求一致。
Install a power module
安装
Remove a power module
拆卸
1
2
Install and remove a fan tray (S5830-106S)
S5830-106S
Install a fan tray
安装
Remove a fan tray
拆卸
1
2
1
2
1
2
2
1
1
2
1
2
6