H3C S5560X-HI Series, Руководство по установке

Страница: 15 / 77

2-8
Installing the switch in a 19-inch rack
You can use front and rear mounting brackets to mount the switch in a 19-inch rack. The front
mounting brackets can be installed near the port side or power supply side as required. See
Table2-2
for the racks available for the switch.
Table2-2 Racks available for the switch
Device model Racks available for the switch
S5560X-30F-HI
S5560X-54F-HI
•
With the wide flange of the rear mounting brackets inside the rack —Rack
with a depth (distance between the front and rear rack posts) in the range of 327 to
494 mm (12.87 to 19.45 in).
•
With the wide flange of the rear mounting brackets outside the rack —Rack
with a depth in the range of 172 to 339 mm (6.77 to 13.35 in). The distance from the
rear rack posts to the inner surface of the cabinet door must be larger than 153 mm
(6.02 in).
S5560X-34C-HI
S5560X-58C-HI
•
With the wide flange of the rear mounting brackets inside the rack —Rack
with a depth in the range of 355 × 521 mm (13.98 × 20.51 in).
•
With the wide flange of the rear mounting brackets outside the rack —Rack
with a depth in the range of 199 × 365 mm (7.83 × 14.37 in). The distance from the
rear rack posts to the inner surface of the cabinet door must be larger than 153 mm
(6.02 in).
Figure2-2 Procedure for rack-mounting the switch
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack by using the mounting brackets.
Mounting brackets and shoulder screw
Table2-3 Mounting brackets and shoulder screw
Switch model Front mounting bracket
Rear mounting bracket and
shoulder screw
S5560X-34C-HI
S5560X-58C-HI
Front mounting bracket A (provided) Provided
S5560X-30F-HI
S5560X-54F-HI
Front mounting bracket B (provided) Provided
Select an installation
position for the front
mounting brackets
(near the port side or
power supply side)
Attach the front
mounting brackets to
the switch
Attach the shoulder
screws to the switch
Attach the rear
mounting brackets to
the rack
Mount the switch in
the rack