H3C S5500-SI Series, Руководство по настройке

Страница: 32 / 130

3-7
Configuring MIP Generation Rules
As functional entities in a service instance, MIPs respond to various CFD frames, such as LTM frames,
LBM frames, 1DM frames, DMM frames, and TST frames.
MIPs are generated on each port automatically according to related MIP generation rules. If a port has
no MIP, the system will check the MAs in each MD (from low to high levels), and follow the procedure
described in Figure 3-5 to create or not to create MIPs (within the same VLAN):
Figure 3-5 Procedure of creating MIPs
You can choose appropriate MIP generation rules based on your network design.
Follow these steps to configure the rules for generating MIPs:
To do... Use the command... Remarks
Enter system view system-view
—
Configure the rules for generating
MIPs
cfd mip-rule
{
explicit
|
default
}
service-instance instance-id
Required
By default, neither MIPs nor the
rules for generating MIPs are
configured.