273
Displaying and maintaining RIPng
To do…
Use the command…
Remarks
Display configuration information
of a RIPng process
display ripng
[
process-id
|
vpn-instance
vpn-instance-name
]
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display routes in the RIPng
database
display ripng
process-id
database
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display the routing information of
a specified RIPng process
display ripng
process-id
route
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display RIPng interface information
display ripng
process-id
interface
[
interface-type interface-number
]
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Reset a RIPng process
reset ripng
process-id
process
Available in user view
Clear statistics of a RIPng process
reset ripng
process-id
statistics
Available in user view
RIPng configuration examples
Configuring RIPng basic functions
Network requirements
, all switches run RIPng. Configure Switch B to filter the route (3::/64) learned from Switch
C, which means the route will not be added to the routing table of Switch B, and Switch B will not forward
it to Switch A.
Figure 103
Network diagram
Configuration procedure
1.
Configure the IPv6 address for each interface. (Details not shown)
2.
Configure basic RIPng functions.
# Configure Switch A.
<SwitchA> system-view
[SwitchA] ripng 1
[SwitchA-ripng-1] quit
[SwitchA] interface vlan-interface 100
[SwitchA-Vlan-interface100] ripng 1 enable
