H3C S5150-EI Series, Руководство по настройке

Страница: 35 / 59

29
Step Command Remarks
1. Enter system view.
system-view N/A
2. Configure a network port to
not shut down when the IRF
fabric transits to the
Recovery state.
mad exclude interface
interface-type interface-number
By default, all network ports on a
Recovery-state IRF fabric are
shut down, except for the IRF
physical interfaces and console
port.
Recovering an IRF fabric
When the failed IRF link between two split IRF fabrics is recovered, all member devices in the
inactive IRF fabric automatically join the active IRF fabric as subordinate members. The network
ports that have been shut down by MAD automatically restore their original physical state, as shown
in
Figure 13 .
Figure 13 Recovering the IRF fabric
If the active IRF fabric fails before the IRF link is recovered (see Figure 14 ), use the mad restore
command on the inactive IRF fabric to recover the inactive IRF fabric. This command also brings up
all physical interfaces that were shut down by MAD. After you repair the IRF link, the two parts merge
into a unified IRF fabric.