H3C S5130S-28C-HI Скачать руководство пользователя страница 89 | Manualshive

Страница: 89 / 91

H3C S5130S-28C-HI Скачать руководство пользователя страница 89

8-84

MODE LED status

10/100/1000BASE-T
autosensing Ethernet
port LED status

Description

Flashing yellow (IRF mode) Steady green

The 10/100/1000BASE-T autosensing
Ethernet port LEDs on the switch work in
conjunction to indicate the IRF member ID
of the switch. For example, if the LED for
port 5 is steady green and the other port
LEDs are off, the IRF member ID of the
switch is 5.

SFP/SFP+ port LED

Table 8-12 SFP/SFP+ port LED description

SFP/SFP+ port LED status

Description

Steady green

A link is present on the port.

Flashing green

The port is sending or receiving data.

Off

•

No link is present on the port.

•

The mode LED is operating in IRF mode.

•

The mode LED is operating in PoE mode (only for PoE switches).

Management Ethernet port LED

Table 8-13 Management Ethernet port LED description

Management Ethernet port LED (ACT/LINK) status

Description

Steady green

A link is present on the port.

Flashing green

The port is sending or receiving data.

Off

No link is present on the port.

Input status LED and output status LED on the power module

The PSR180-56A, PSR360-56A, PSR560-56D, PSR720-56A, and PSR1110-56A power modules
each have an input status LED and an output status LED. For more information about the LEDs, see
the manuals for the power modules.

Expansion slot LED

The S5130S-28C-HI, S5130S-52C-HI, S5130S-28C-PWR-HI, and S5130S-52C-PWR-HI switches
each provide an expansion slot at the rear panel. You can view the expansion slot LED on the front
panel to identify the status of the installed expansion module.

Table 8-14 Expansion slot status LED description

Expansion slot LED (SLOT) status

Description

Steady on

An expansion module is present and is operating correctly.

«
...
87
88
89
90
91
»

Содержание S5130S-28C-HI




























































































Отзывы:

Нет отзывов