H3C S5130S-10MS-UPWR-EI, Руководство пользователя, Страница: 36 / 91

33
Table 7 IRF physical ports and use restrictions
Device model
Candidate IRF physical
ports Restrictions for using the ports for
IRF connections
S5130S-16S-PWR-EI
S5130S-28S-EI
S5130S-28PS-EI
S5130S-28S-EI-M
S5130S-28S-PWR-EI
S5130S-28S-HPWR-EI
S5130S-28S-HPWR-EI-Q
S5130S-28F-EI
S5130S-52S-EI
S5130S-52S-EI-M
S5130S-52S-PWR-EI
S5130S-52F-EI
All the following ports on the
front panel:
•
SFP+ ports
•
10/100/1000BASE-T
autosensing ports
(supported only in
F6304 and later)
•
SFP ports (supported
only in F6304 and later)
The port must operate at its highest speed.
•
SFP+ port —10 Gbps
•
10/100/1000BASE-T autosensing
port
—1 Gbps
•
SFP port —1 Gbps
The IRF physical ports on the member
switches must be same type.
For switches with 52 service ports, the service
ports are divided into two groups: ports 1 to
24, port 51, and port 52 in one group and
ports 25 to 50 in the other group.
To bind multiple ports to an IRF port, make
sure the ports are in the same group. Ports in
one group can be bound to different IRF ports.
S5130S-28MP-EI
S5130S-28MP-HPWR-EI
S5130S-52MP-EI
All the following ports on the
front panel:
•
5G/2.5G/1000BASE-T
autosensing Ethernet
ports
•
10/100/1000BASE-T
autosensing Ethernet
ports
•
SFP ports
The port must operate at its highest speed.
•
5G/2.5G/1000BASE-T autosensing
port
—5 Gbps
•
10/100/1000BASE-T autosensing
port
—1 Gbps
•
SFP port —1 Gbps
The IRF physical ports on the member
switches must be same type.
For switches with 52 service ports, the service
ports are divided into two groups: ports 1 to
24, port 51, and port 52 in one group and
ports 25 to 50 in the other group.
To bind multiple ports to an IRF port, make
sure the ports are in the same group. Ports in
one group can be bound to different IRF ports.
S5130S-10MS-UPWR-EI
All the following ports on the
front panel:
•
2.5G/1000/100BASE-T
autosensing Ethernet
ports
•
SFP+ ports
The port must operate at its highest speed.
•
2.5G/1000/100BASE-T autosensing
port
—2.5 Gbps
•
SFP+ port —10 Gbps
The IRF physical ports on the member
switches must be same type.
S5130S-28ST-EI
S5130S-52ST-EI
S5130S-28ST-PWR-EI
S5130S-52ST-PWR-EI
All the following ports on the
front panel:
•
10/5/2.5/1GBASE-T
autosensing Ethernet
ports
•
10/100/1000BASE-T
autosensing Ethernet
ports
•
SFP+ ports
The port must operate at its highest speed.
•
10/5/2.5/1GBASE-T autosensing
port
—10 Gbps
•
10/100/1000BASE-T autosensing
port
—1 Gbps
•
SFP+ port —10 Gbps
The IRF physical ports on the member
switches must be same type.
For switches with 52 service ports, the service
ports are divided into two groups: ports 1 to
24, port 51, and port 52 in one group and
ports 25 to 50 in the other group.
To bind multiple ports to an IRF port, make
sure the ports are in the same group. Ports in
one group can be bound to different IRF ports.